Make sure that your browser is Java enabled...





  • Automatic Dry Priming and Repriming
  • Air Operated/Explosion Proof
  • Dry Running Capabilities
  • Ease of Portability
  • Non-Stall Air Valve
  • Adjustable Flowrate
  • General Construction
  • Chemical Transfer
  • Fuel/Oil Transfer
  • Sump Maintenance
  • Construction Dewatering
  • High Solids Content Product
  • Metered Applications
  • Filtration
  • Drainage
 

Product Data Sheet
2" EB2M Stainless Steel Pump
This is an air-powered double diaphragm pump designed for applications requiring low flowrates and moderate head pressures. Performance is the same as the aluminum version; only the materials are different. This pump must be supplied with an external source of compressed air to operate, It can run dry for extended periods of time without damage. The flowrate is varied by regulating the air supply.
Minimum Air Pressure: 20 psi
Maximum Air Pressure: 100 psi
Minimum Shutoff Head: 44 feet (19 psi) (1)
Maximum Shutoff Head: 230 feet (100 psi) (1)
Maximum Suction Lift: 22 feet (2)
Minimum Flow: 0 gpm
Maximum Flow: 135 gpm
Maximum Temperature: 212°F
Maximum Solids Size: 1/4"
Displacement: 0.43 gals/stroke
To the best of our knowledge, the technical data contained herein is true and accurate at the date of issuance and is subject to change without prior notice. NO WARRANTY OR GUARANTEE OF ANY KIND IS MADE BY BAKER TANKS, EITHER EXPRESSED OR IMPLIED.
Click on image to enlarge:
Suction Flange: Two-inch NPT (female)
Discharge Flange: Two-inch NPT (female)
Air Inlet Port: 3/4" NPT (female)
Air Exhaust Port: 3/4" NPT (female)
Overall Weight: 134 lbs.
Overall Height: 2'-0"
Overall Width: 1'-1"
Overall Length: 1'-7"
Manifold Elbow 316 Stainless steel
Outer Chamber: 316 Stainless steel
Inner Chamber: Aluminum
Outer Diaphragm Plate: 316 Stainless steel
Inner Diaphragm Plate: Plated steel
Intermediate Housing: Aluminum
Diaphragm Rod: 416 Stainless steel
Valve Seat: Teflon
Hardware: Plated steel
Diaphragm: Teflon over neoprene
Ball Valve: Teflon
Air Valve: Aluminum
Note:
(1) Based on 1.0 specific gravity.
(2) For suctions lifts exceeding 10 feet, fill the chambers with liquid prior to priming
Rev: 8/1999
In order to view the Pump Specifications, Adobe Acrobat is required
Download Pump Specifications
In Adobe Acrobat Format
© Copyright 2002 Baker Pumps. All rights reserved.
www.bakertanks.com www.andresswalsh.com www.bakerpumps.com